PE Insulated, LSZH Sheathed & Overall Screened Instrumentation Cables (Multipair)
 |
| Quantity: | |
|---|---|
PE Insulated, LSZH Sheathed & Overall Screened Instrumentation Cables (Multipair)
RE-2Y(St)H 90°C / 300V
| STANDARDS | Basic design to EN 50288-7 |
| APPLICATION | Instrument cable minimizes noise and signal interference, delivering clean signals in harsh environments and general manufacturing operations. |
FIRE PERFORMANCE
Flame Retardance (Single Vertical Wire Test) | EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE 0482-332-1; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1* |
Reduced Fire Propagation (Vertically-mounted bundled wires & cable test) | EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4 |
Halogen Free | IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1* |
No Corrosive Gas Emission | IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2* |
Minimum Smoke Emission | IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2* |
No Toxic gases | NES 02-713; NF C 20-454 |
Sunlight Resistance | UL 1581 section 1200 |
Oil Resistance | ICEA S-73-532** |
Note: Asterisk * denotes superseded standard, **Test temperature +60°C, duration 4h. Retention: min 60% of tensite strength/min.60% of elongation.
| VOLTAGE RATING | 300V |
| CABLE CONSTRUCTION | |
| Conductor: | Annealed copper solid or plain copper stranded to IEC 60228 Class 2. |
| Insulation: | PE compound, EN 50290. 2-23. |
| Pair: | Two insulated conductors uniformly twisted together with a lay not exceeding 100mm |
| Binder tape: | PETP transparent tape |
| Overall Screen: | Aluminium/polyester tape is applied over the laid up pairs metallic side down in contact with tinned copper drain wire, 0.5mm² |
| Outer sheath: | Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1 (Thermosetting LSZH compound type SW2-SW4 as per BS 7655-2.6 can be offered.). UV resistance, hydrocarbon resistance, oil resistance, anti rodent and anti termite properties can be offered as option. |
| COLOUR CODE | |
| Insulation: | Black / White, continuously numbered on white core(1, 2..)for multipair. |
| Outer Sheath: | Black or blue for intrinsically safe systems |
| Physical AND THERMAL PROPERTIES | |
| Temperature Range During Operation (Fixed State): | -30°C – +90°C |
| Temperature Range During Installation (Mobile State): | -5°C – +50°C |
| Minimum Bending Radius: | 7.5 X Overall Diameter |
CONSTRUCTION PARAMETERS
Cable Code | RE-2Y(St)H | ||||
No. of Pairsx2 xCross Section | Nominal Insulation Thickness | Nominal Outer Sheath Thickness | Nominal Overall Diameter | Approx. Weight | |
No.x2xmm2 | mm | mm | mm | kg/km | |
0.5mm2, Multipair | |||||
RE-2Y(St)H 2P0.5 | 2x2x0.5 | 0.35 | 0.9 | 7.6 | 66 |
RE-2Y(St)H 4P0.5 | 3x2x0.5 | 0.35 | 0.9 | 8.8 | 98 |
RE-2Y(St)H 5P0.5 | 4x2x0.5 | 0.35 | 1.0 | 9.8 | 118 |
RE-2Y(St)H 6P0.5 | 5x2x0.5 | 0.35 | 1.0 | 10.6 | 138 |
RE-2Y(St)H 8P0.5 | 8x2x0.5 | 0.35 | 1.0 | 11.3 | 160 |
RE-2Y(St)H 10P0.5 | 10x2x0.5 | 0.35 | 1.1 | 12.9 | 201 |
RE-2Y(St)H 12P0.5 | 12x2x0.5 | 0.35 | 1.1 | 13.5 | 236 |
RE-2Y(St)H 16P0.5 | 16x2x0.5 | 0.35 | 1.1 | 15.2 | 300 |
RE-2Y(St)H 20P0.5 | 20x2x0.5 | 0.35 | 1.2 | 16.9 | 367 |
RE-2Y(St)H 24P0.5 | 24x2x0.5 | 0.35 | 1.2 | 18.3 | 419 |
0.75mm2, Multipair | |||||
RE-2Y(St)H 2P0.75 | 2x2x0.75 | 0.38 | 0.9 | 8.5 | 87 |
RE-2Y(St)H 4P0.75 | 3x2x0.75 | 0.38 | 1.0 | 10.0 | 123 |
RE-2Y(St)H 5P0.75 | 4x2x0.75 | 0.38 | 1.0 | 10.9 | 150 |
RE-2Y(St)H 6P0.75 | 5x2x0.75 | 0.38 | 1.0 | 11.8 | 175 |
RE-2Y(St)H 8P0.75 | 8x2x0.75 | 0.38 | 1.1 | 12.8 | 220 |
RE-2Y(St)H 10P0.75 | 10x2x0.75 | 0.38 | 1.1 | 14.5 | 267 |
RE-2Y(St)H 12P0.75 | 12x2x0.75 | 0.38 | 1.1 | 15.1 | 298 |
RE-2Y(St)H 16P0.75 | 16x2x0.75 | 0.38 | 1.2 | 17.3 | 409 |
RE-2Y(St)H 20P0.75 | 20x2x0.75 | 0.38 | 1.3 | 19.2 | 480 |
RE-2Y(St)H 24P0.75 | 24x2x0.75 | 0.38 | 1.3 | 20.8 | 561 |
1.0mm2, Multipair | |||||
RE-2Y(St)H 2P1.0 | 2x2x1.0 | 0.4 | 0.9 | 9.2 | 102 |
RE-2Y(St)H 4P1.0 | 3x2x1.0 | 0.4 | 1.0 | 10.9 | 156 |
RE-2Y(St)H 5P1.0 | 4x2x1.0 | 0.4 | 1.0 | 11.9 | 183 |
RE-2Y(St)H 6P1.0 | 5x2x1.0 | 0.4 | 1.0 | 13.0 | 224 |
RE-2Y(St)H 8P1.0 | 8x2x1.0 | 0.4 | 1.1 | 14.0 | 273 |
RE-2Y(St)H 10P1.0 | 10x2x1.0 | 0.4 | 1.1 | 15.9 | 324 |
RE-2Y(St)H 12P1.0 | 12x2x1.0 | 0.4 | 1.2 | 16.8 | 383 |
RE-2Y(St)H 16P1.0 | 16x2x1.0 | 0.4 | 1.2 | 19.0 | 513 |
RE-2Y(St)H 20P1.0 | 20x2x1.0 | 0.4 | 1.3 | 21.1 | 619 |
RE-2Y(St)H 24P1.0 | 24x2x1.0 | 0.4 | 1.4 | 23.1 | 738 |
1.3mm2, Multipair | |||||
RE-2Y(St)H 2P1.3 | 2x2x1.3 | 0.45 | 1.0 | 10.4 | 122 |
RE-2Y(St)H 4P1.3 | 3x2x1.3 | 0.45 | 1.0 | 12.0 | 190 |
RE-2Y(St)H 5P1.3 | 4x2x1.3 | 0.45 | 1.1 | 13.4 | 233 |
RE-2Y(St)H 6P1.3 | 5x2x1.3 | 0.45 | 1.1 | 14.6 | 273 |
RE-2Y(St)H 8P1.3 | 8x2x1.3 | 0.45 | 1.2 | 15.7 | 330 |
RE-2Y(St)H 10P1.3 | 10x2x1.3 | 0.45 | 1.2 | 17.9 | 422 |
RE-2Y(St)H 12P1.3 | 12x2x1.3 | 0.45 | 1.3 | 18.9 | 487 |
RE-2Y(St)H 16P1.3 | 16x2x1.3 | 0.45 | 1.3 | 21.4 | 678 |
RE-2Y(St)H 20P1.3 | 20x2x1.3 | 0.45 | 1.4 | 23.8 | 790 |
RE-2Y(St)H 24P1.3 | 24x2x1.3 | 0.45 | 1.5 | 25.9 | 921 |
1.5mm2, Multipair | |||||
RE-2Y(St)H 2P1.5 | 2x2x1.5 | 0.45 | 1.0 | 10.8 | 139 |
RE-2Y(St)H 4P1.5 | 3x2x1.5 | 0.45 | 1.1 | 12.7 | 212 |
RE-2Y(St)H 5P1.5 | 4x2x1.5 | 0.45 | 1.1 | 14.0 | 259 |
RE-2Y(St)H 6P1.5 | 5x2x1.5 | 0.45 | 1.2 | 15.2 | 312 |
RE-2Y(St)H 8P1.5 | 8x2x1.5 | 0.45 | 1.2 | 16.4 | 378 |
RE-2Y(St)H 10P1.5 | 10x2x1.5 | 0.45 | 1.3 | 18.8 | 473 |
RE-2Y(St)H 12P1.5 | 12x2x1.5 | 0.45 | 1.3 | 19.7 | 548 |
RE-2Y(St)H 16P1.5 | 16x2x1.5 | 0.45 | 1.4 | 22.5 | 727 |
RE-2Y(St)H 20P1.5 | 20x2x1.5 | 0.45 | 1.5 | 25.0 | 903 |
RE-2Y(St)H 24P1.5 | 24x2x1.5 | 0.45 | 1.5 | 27.1 | 1051 |
Note : Other conductor sizes & core configurations are available upon request
Electrical PROPERTIES
Conductor Area Size | mm 2 | 0.5 | 0.75 | 1.0 | 1.3 | 1.5 | |
Insulation thickness (nominal) | mm | 0.35 | 0.38 | 0.4 | 0.45 | 0.45 | |
Conductor resistance (20°C) | Ω/km | 36.7 | 25 | 18.5 | 14.2 | 12.3 | |
Insulation resistance (20°C) | MΩ.km(Min.) | 5000 | |||||
Mutual Capacitance (1 kHz) | pF/m(Max.) | ||||||
≤ 4 pairs | 90 | 90 | 90 | 102 | 102 | ||
all other pairs | 75 | 75 | 75 | 85 | 85 | ||
Capacitance unbalance(1 kHz) | pF/500 m (Max.) | 500 | |||||
Inductance | mH/km (Max.) | 1 | |||||
L / R (ratio) (max.) | μH/Ω | 25 | 25 | 25 | 40 | 40 | |
Operating voltage Urms | V | 300 | |||||
Test Voltage | Core to Core | V | 1500 | ||||
Core to Screen | V | 1500 | |||||
PE Insulated, LSZH Sheathed & Overall Screened Instrumentation Cables (Multipair)
RE-2Y(St)H 90°C / 300V
| STANDARDS | Basic design to EN 50288-7 |
| APPLICATION | Instrument cable minimizes noise and signal interference, delivering clean signals in harsh environments and general manufacturing operations. |
FIRE PERFORMANCE
Flame Retardance (Single Vertical Wire Test) | EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE 0482-332-1; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1* |
Reduced Fire Propagation (Vertically-mounted bundled wires & cable test) | EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4 |
Halogen Free | IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1* |
No Corrosive Gas Emission | IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2* |
Minimum Smoke Emission | IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2* |
No Toxic gases | NES 02-713; NF C 20-454 |
Sunlight Resistance | UL 1581 section 1200 |
Oil Resistance | ICEA S-73-532** |
Note: Asterisk * denotes superseded standard, **Test temperature +60°C, duration 4h. Retention: min 60% of tensite strength/min.60% of elongation.
| VOLTAGE RATING | 300V |
| CABLE CONSTRUCTION | |
| Conductor: | Annealed copper solid or plain copper stranded to IEC 60228 Class 2. |
| Insulation: | PE compound, EN 50290. 2-23. |
| Pair: | Two insulated conductors uniformly twisted together with a lay not exceeding 100mm |
| Binder tape: | PETP transparent tape |
| Overall Screen: | Aluminium/polyester tape is applied over the laid up pairs metallic side down in contact with tinned copper drain wire, 0.5mm² |
| Outer sheath: | Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1 (Thermosetting LSZH compound type SW2-SW4 as per BS 7655-2.6 can be offered.). UV resistance, hydrocarbon resistance, oil resistance, anti rodent and anti termite properties can be offered as option. |
| COLOUR CODE | |
| Insulation: | Black / White, continuously numbered on white core(1, 2..)for multipair. |
| Outer Sheath: | Black or blue for intrinsically safe systems |
| Physical AND THERMAL PROPERTIES | |
| Temperature Range During Operation (Fixed State): | -30°C – +90°C |
| Temperature Range During Installation (Mobile State): | -5°C – +50°C |
| Minimum Bending Radius: | 7.5 X Overall Diameter |
CONSTRUCTION PARAMETERS
Cable Code | RE-2Y(St)H | ||||
No. of Pairsx2 xCross Section | Nominal Insulation Thickness | Nominal Outer Sheath Thickness | Nominal Overall Diameter | Approx. Weight | |
No.x2xmm2 | mm | mm | mm | kg/km | |
0.5mm2, Multipair | |||||
RE-2Y(St)H 2P0.5 | 2x2x0.5 | 0.35 | 0.9 | 7.6 | 66 |
RE-2Y(St)H 4P0.5 | 3x2x0.5 | 0.35 | 0.9 | 8.8 | 98 |
RE-2Y(St)H 5P0.5 | 4x2x0.5 | 0.35 | 1.0 | 9.8 | 118 |
RE-2Y(St)H 6P0.5 | 5x2x0.5 | 0.35 | 1.0 | 10.6 | 138 |
RE-2Y(St)H 8P0.5 | 8x2x0.5 | 0.35 | 1.0 | 11.3 | 160 |
RE-2Y(St)H 10P0.5 | 10x2x0.5 | 0.35 | 1.1 | 12.9 | 201 |
RE-2Y(St)H 12P0.5 | 12x2x0.5 | 0.35 | 1.1 | 13.5 | 236 |
RE-2Y(St)H 16P0.5 | 16x2x0.5 | 0.35 | 1.1 | 15.2 | 300 |
RE-2Y(St)H 20P0.5 | 20x2x0.5 | 0.35 | 1.2 | 16.9 | 367 |
RE-2Y(St)H 24P0.5 | 24x2x0.5 | 0.35 | 1.2 | 18.3 | 419 |
0.75mm2, Multipair | |||||
RE-2Y(St)H 2P0.75 | 2x2x0.75 | 0.38 | 0.9 | 8.5 | 87 |
RE-2Y(St)H 4P0.75 | 3x2x0.75 | 0.38 | 1.0 | 10.0 | 123 |
RE-2Y(St)H 5P0.75 | 4x2x0.75 | 0.38 | 1.0 | 10.9 | 150 |
RE-2Y(St)H 6P0.75 | 5x2x0.75 | 0.38 | 1.0 | 11.8 | 175 |
RE-2Y(St)H 8P0.75 | 8x2x0.75 | 0.38 | 1.1 | 12.8 | 220 |
RE-2Y(St)H 10P0.75 | 10x2x0.75 | 0.38 | 1.1 | 14.5 | 267 |
RE-2Y(St)H 12P0.75 | 12x2x0.75 | 0.38 | 1.1 | 15.1 | 298 |
RE-2Y(St)H 16P0.75 | 16x2x0.75 | 0.38 | 1.2 | 17.3 | 409 |
RE-2Y(St)H 20P0.75 | 20x2x0.75 | 0.38 | 1.3 | 19.2 | 480 |
RE-2Y(St)H 24P0.75 | 24x2x0.75 | 0.38 | 1.3 | 20.8 | 561 |
1.0mm2, Multipair | |||||
RE-2Y(St)H 2P1.0 | 2x2x1.0 | 0.4 | 0.9 | 9.2 | 102 |
RE-2Y(St)H 4P1.0 | 3x2x1.0 | 0.4 | 1.0 | 10.9 | 156 |
RE-2Y(St)H 5P1.0 | 4x2x1.0 | 0.4 | 1.0 | 11.9 | 183 |
RE-2Y(St)H 6P1.0 | 5x2x1.0 | 0.4 | 1.0 | 13.0 | 224 |
RE-2Y(St)H 8P1.0 | 8x2x1.0 | 0.4 | 1.1 | 14.0 | 273 |
RE-2Y(St)H 10P1.0 | 10x2x1.0 | 0.4 | 1.1 | 15.9 | 324 |
RE-2Y(St)H 12P1.0 | 12x2x1.0 | 0.4 | 1.2 | 16.8 | 383 |
RE-2Y(St)H 16P1.0 | 16x2x1.0 | 0.4 | 1.2 | 19.0 | 513 |
RE-2Y(St)H 20P1.0 | 20x2x1.0 | 0.4 | 1.3 | 21.1 | 619 |
RE-2Y(St)H 24P1.0 | 24x2x1.0 | 0.4 | 1.4 | 23.1 | 738 |
1.3mm2, Multipair | |||||
RE-2Y(St)H 2P1.3 | 2x2x1.3 | 0.45 | 1.0 | 10.4 | 122 |
RE-2Y(St)H 4P1.3 | 3x2x1.3 | 0.45 | 1.0 | 12.0 | 190 |
RE-2Y(St)H 5P1.3 | 4x2x1.3 | 0.45 | 1.1 | 13.4 | 233 |
RE-2Y(St)H 6P1.3 | 5x2x1.3 | 0.45 | 1.1 | 14.6 | 273 |
RE-2Y(St)H 8P1.3 | 8x2x1.3 | 0.45 | 1.2 | 15.7 | 330 |
RE-2Y(St)H 10P1.3 | 10x2x1.3 | 0.45 | 1.2 | 17.9 | 422 |
RE-2Y(St)H 12P1.3 | 12x2x1.3 | 0.45 | 1.3 | 18.9 | 487 |
RE-2Y(St)H 16P1.3 | 16x2x1.3 | 0.45 | 1.3 | 21.4 | 678 |
RE-2Y(St)H 20P1.3 | 20x2x1.3 | 0.45 | 1.4 | 23.8 | 790 |
RE-2Y(St)H 24P1.3 | 24x2x1.3 | 0.45 | 1.5 | 25.9 | 921 |
1.5mm2, Multipair | |||||
RE-2Y(St)H 2P1.5 | 2x2x1.5 | 0.45 | 1.0 | 10.8 | 139 |
RE-2Y(St)H 4P1.5 | 3x2x1.5 | 0.45 | 1.1 | 12.7 | 212 |
RE-2Y(St)H 5P1.5 | 4x2x1.5 | 0.45 | 1.1 | 14.0 | 259 |
RE-2Y(St)H 6P1.5 | 5x2x1.5 | 0.45 | 1.2 | 15.2 | 312 |
RE-2Y(St)H 8P1.5 | 8x2x1.5 | 0.45 | 1.2 | 16.4 | 378 |
RE-2Y(St)H 10P1.5 | 10x2x1.5 | 0.45 | 1.3 | 18.8 | 473 |
RE-2Y(St)H 12P1.5 | 12x2x1.5 | 0.45 | 1.3 | 19.7 | 548 |
RE-2Y(St)H 16P1.5 | 16x2x1.5 | 0.45 | 1.4 | 22.5 | 727 |
RE-2Y(St)H 20P1.5 | 20x2x1.5 | 0.45 | 1.5 | 25.0 | 903 |
RE-2Y(St)H 24P1.5 | 24x2x1.5 | 0.45 | 1.5 | 27.1 | 1051 |
Note : Other conductor sizes & core configurations are available upon request
Electrical PROPERTIES
Conductor Area Size | mm 2 | 0.5 | 0.75 | 1.0 | 1.3 | 1.5 | |
Insulation thickness (nominal) | mm | 0.35 | 0.38 | 0.4 | 0.45 | 0.45 | |
Conductor resistance (20°C) | Ω/km | 36.7 | 25 | 18.5 | 14.2 | 12.3 | |
Insulation resistance (20°C) | MΩ.km(Min.) | 5000 | |||||
Mutual Capacitance (1 kHz) | pF/m(Max.) | ||||||
≤ 4 pairs | 90 | 90 | 90 | 102 | 102 | ||
all other pairs | 75 | 75 | 75 | 85 | 85 | ||
Capacitance unbalance(1 kHz) | pF/500 m (Max.) | 500 | |||||
Inductance | mH/km (Max.) | 1 | |||||
L / R (ratio) (max.) | μH/Ω | 25 | 25 | 25 | 40 | 40 | |
Operating voltage Urms | V | 300 | |||||
Test Voltage | Core to Core | V | 1500 | ||||
Core to Screen | V | 1500 | |||||