Availability: | |
---|---|
Quantity: | |
Application | The cables are designed to give good protection to the core against inductive interference. The cables are used for outdoor signaling equipment. |
Standards | VDE 0816/DIN 57816 |
Construction | |
Conductors: | Solid annealed bare copper 0.9/1.4mm as per ASTM B-3/IEC 60228 Class 1 |
Insulation: | Solid polyethylene as per ASTM D 1248/IEC 60708 |
Cabling Element: | Four insulated conductors are twisted together to form a quad |
Cable Core Assembly: | The cores are cabled together in concentric layers to form the cable core. Units are identified by colour coded binders |
Core Wrapping: | One or more non-hygroscopic polyester tapes are helically or longitudinally laid with an overlap |
Electrostatic Screen: | Copper tape or copper wire braid with wire diameter of 0.12mm |
Bedding: | PE or LSZH |
Electrostatic Armour: | Two steel tapes of 0.5mm or 0.8mm are helically applied with gap. The outer tape will cover the gap left by the inner one |
Sheath: | PE/PVC or LSZH |
Ripcord: | Nylon ripcord may be placed parallel to the cores to facilitate sheath removal |
Electrical Properties
Nominal Conductor Diameter | mm | 0.9 | 1.4 |
Conductor Size | mm2 | 0.636 | 1.539 |
Maximum Conductor Resistance @20°C | Ω/km | 28 | 12.1 |
Minimum Insulation Resistance @500V DC | MΩ.km | 35000 | 5000 |
Maximum Resistance Unbalance | % | 2.5 | 2.5 |
Maximum Mutual Capacitance @0.8KHz | nF/km | 45 | 50 |
Maximum Capacitance Unbalance @1KHz pair-to-pair | pF/500m | 250 | 250 |
Maximum Capacitance Unbalance @1KHz pair-to-ground | pF/500m | 1200 | 1200 |
Maximum Average Attenuation @1KHz | dB/km | 0.7 | 0.46 |
Maximum Average Attenuation @10KHz | dB/km | 1.6 | 0.85 |
Maximum Average Attenuation @30KHz | dB/km | 2.1 | 1.3 |
Dielectric Strength Conductor to Conductor 3secs | V DC | 3000 | 3000 |
Conductor to Screen 3secs | V DC | 3500 | 3500 |
Nominal Insulation Thickness | mm | 0.45 | 0.65 |
Nominal Insulated Conductor Diameter | mm | 1.8 | 2.7 |
Reduction Factor
Type group | Frequency Hz | Cable reduction factor(planning values)at field strength | ||
70V/km | 100V/km | 350V/km | ||
1,5 | 1623 | 0.70 | 0.60 | 0.92 |
2,3,6,7 | 0.55 | 0.45 | 0.80 | |
4,8 | 0.30 | 0.25 | 0.70 | |
1,5 | 50 | 0.45 | 0.38 | 0.52 |
2,6 | 0.21 | 0.17 | 0.29 | |
3,7 | 0.42 | 0.37 | 0.30 | |
4,8 | 0.17 | 0.14 | 0.12 |
Reference length is 300m. Conversion factor for different lengths L (at least 200m): L/300
Type Codes
AJ- | -Outdoor cable with protection against inductive influences |
2Y | - Solid PE |
Y | - PVC |
H | - LSZH |
(St) | - Static shield of plastic-backed aluminum Tape for indoor cables |
D | - Shield of copper wire whipping. |
S | - Railway signaling cable |
Lg | - Stranded in layers |
(…Cu) | - Total cross section of copper shield in mm sq |
(fK) | - Longitdinally applied copper tape, supplement to (St) |
2B… | - two layers of steel tape, thickness of steel tape in mm |
Mechanical and Thermal Properties
Temperature range during operation (fixed state): -30°C – +70°C
Temperature range during installation (mobile state): -20°C – +50°C
Minimum bending radius: 15 x Overall Diameter
Colour Code
Coloured rings on the insulation
The tracer quad in each layer has a red helix
Dimensions And Weight
VDE CODE:
Copper tape screen & steel tape thickness of 0.5/0.8mm
AJ-2Y(St)YbY…x4x0.9/1.4 S Lg (fK) (2B 0.5) AJ-2Y(St)YbY…x4x0.9/1.4 S Lg (fK) (2B 0.8)
Copper wire screen (wire diameter of 1.2mm) & steel tape thickness of 0.8mm
AJ-2YDYbY…x4x0.9/1.4 S Lg (…Cu/2B 0.5) AJ-2YDYbY…x4x0.9/1.4 S Lg (…Cu/2B 0.8)
Cable Code | Number of Quads | Nominal Bedding/ Sheath Thickness mm | Nominal Overall Diameter mm | Nominal Weight kg/km |
Type 1: 0.9mm Conductor, 1.8mm Insulated Wire, Copper Tape Screened, RF 0.6 Steel tape thickness 0.5mm | ||||
UE-TP816AJ-2Y(St)YbY-S Lg (fK)(2B0.5)-3Q09 | 3 | 1.7/1.8 | 22.0 | 810 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK)(2B0.5)-5Q09 | 5 | 1.7/1.8 | 25.5 | 1035 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK)(2B0.5)-7Q09 | 7 | 1.7/1.8 | 26.5 | 1150 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK)(2B0.5)-10Q09 | 10 | 1.8/2.0 | 32.5 | 1550 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK)(2B0.5)-14Q09 | 14 | 1.8/2.0 | 35.5 | 1870 |
Type 2: 0.9mm Conductor, 1.8mm Insulated Wire, Copper Wire Screened, RF 0.45 Steel tape thickness 0.5mm | ||||
UE-TP816AJ-2YDYbY-S Lg (23/2B0.5)-7Q09 | 7 | 1.7/1.8 | 28.5 | 1410 |
UE-TP816AJ-2YDYbY-S Lg (25/2B0.5)-10Q09 | 10 | 1.8/2.0 | 33.0 | 1745 |
UE-TP816AJ-2YDYbY-S Lg (25/2B0.5)-14Q09 | 14 | 1.8/2.0 | 36.6 | 2060 |
Type 3: 0.9mm Conductor, 1.8mm Insulated Wire, Copper Tape Screened, RF 0.45 Steel tape thickness 0.8mm | ||||
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.8)-20Q09 | 20 | 1.8/2.0 | 40.0 | 2610 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.8)-30Q09 | 30 | 2.0/2.2 | 46.5 | 3425 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.8)-40Q09 | 40 | 2.0/2.2 | 50.5 | 4015 |
UE-Type 4: 0.9mm Conductor, 1.8mm Insulated Wire, Copper Wire Screened, RF 0.25 Steel tape thickness 0.8mm | ||||
UE-TP816AJ-2YDYbY-S Lg (29/2B0.8)-20Q09 | 20 | 1.8/2.0 | 40.5 | 2840 |
UE-TP816AJ-2YDYbY-S Lg (33/2B0.8)-30Q09 | 30 | 2.0/2.2 | 47.5 | 3655 |
UE-TP816AJ-2YDYbY-S Lg (33/2B0.8)-40Q09 | 40 | 2.0/2.2 | 51.5 | 4230 |
Type 5: 1.4mm Conductor, 2.7mm Insulated Wire, Copper Tape Screened, RF 0.6 Steel tape thickness 0.5mm | ||||
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.5)-3Q14 | 3 | 1.7/1.8 | 26.5 | 1140 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.5)-5Q14 | 5 | 1.7/1.8 | 29.5 | 1430 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.5)-7Q14 | 7 | 1.8/2.0 | 33.5 | 1790 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.5)-10Q14 | 10 | 1.8/2.0 | 39.0 | 2330 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.5)-14Q14 | 14 | 1.8/2.0 | 42.5 | 2805 |
Type 6: 1.4mm Conductor, 2.7mm Insulated Wire, Copper Wire Screened, RF 0.45 Steel tape thickness 0.5mm | ||||
UE-TP816AJ-2YDYbY-S Lg (25/2B0.5)-25Q14 | 25 | 1.8/2.0 | 35.0 | 2050 |
Type 7: 1.4mm Conductor, 2.7mm Insulated Wire, Copper Tape Screened, RF 0.45 Steel tape thickness 0.8mm | ||||
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.8)-20Q14 | 20 | 2.0/2.2 | 49.0 | 4085 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.8)-30Q14 | 30 | 2.4/2.6 | 58.5 | 5585 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.8)-40Q14 | 40 | 2.4/2.6 | 64.0 | 6720 |
Type 8: 1.4mm Conductor, 2.7mm Insulated Wire, Copper Wire Screened, RF 0.25 Steel tape thickness 0.8mm | ||||
UE-TP816AJ-2YDYbY-S Lg (29/2B0.5)-10Q14 | 10 | 1.8/2.0 | 41.0 | 2950 |
UE-TP816AJ-2YDYbY-S Lg (33/2B0.5)-14Q14 | 14 | 2.0/2.2 | 46.0 | 3615 |
UE-TP816AJ-2YDYbY-S Lg (33/2B0.5)-20Q14 | 20 | 2.0/2.2 | 50.0 | 4310 |
UE-TP816AJ-2YDYbY-S Lg (38/2B0.5)-30Q14 | 30 | 2.4/2.6 | 59.5 | 5850 |
UE-TP816AJ-2YDYbY-S Lg (43/2B0.5)-40Q14 | 40 | 2.4/2.6 | 65.0 | 7005 |
Application | The cables are designed to give good protection to the core against inductive interference. The cables are used for outdoor signaling equipment. |
Standards | VDE 0816/DIN 57816 |
Construction | |
Conductors: | Solid annealed bare copper 0.9/1.4mm as per ASTM B-3/IEC 60228 Class 1 |
Insulation: | Solid polyethylene as per ASTM D 1248/IEC 60708 |
Cabling Element: | Four insulated conductors are twisted together to form a quad |
Cable Core Assembly: | The cores are cabled together in concentric layers to form the cable core. Units are identified by colour coded binders |
Core Wrapping: | One or more non-hygroscopic polyester tapes are helically or longitudinally laid with an overlap |
Electrostatic Screen: | Copper tape or copper wire braid with wire diameter of 0.12mm |
Bedding: | PE or LSZH |
Electrostatic Armour: | Two steel tapes of 0.5mm or 0.8mm are helically applied with gap. The outer tape will cover the gap left by the inner one |
Sheath: | PE/PVC or LSZH |
Ripcord: | Nylon ripcord may be placed parallel to the cores to facilitate sheath removal |
Electrical Properties
Nominal Conductor Diameter | mm | 0.9 | 1.4 |
Conductor Size | mm2 | 0.636 | 1.539 |
Maximum Conductor Resistance @20°C | Ω/km | 28 | 12.1 |
Minimum Insulation Resistance @500V DC | MΩ.km | 35000 | 5000 |
Maximum Resistance Unbalance | % | 2.5 | 2.5 |
Maximum Mutual Capacitance @0.8KHz | nF/km | 45 | 50 |
Maximum Capacitance Unbalance @1KHz pair-to-pair | pF/500m | 250 | 250 |
Maximum Capacitance Unbalance @1KHz pair-to-ground | pF/500m | 1200 | 1200 |
Maximum Average Attenuation @1KHz | dB/km | 0.7 | 0.46 |
Maximum Average Attenuation @10KHz | dB/km | 1.6 | 0.85 |
Maximum Average Attenuation @30KHz | dB/km | 2.1 | 1.3 |
Dielectric Strength Conductor to Conductor 3secs | V DC | 3000 | 3000 |
Conductor to Screen 3secs | V DC | 3500 | 3500 |
Nominal Insulation Thickness | mm | 0.45 | 0.65 |
Nominal Insulated Conductor Diameter | mm | 1.8 | 2.7 |
Reduction Factor
Type group | Frequency Hz | Cable reduction factor(planning values)at field strength | ||
70V/km | 100V/km | 350V/km | ||
1,5 | 1623 | 0.70 | 0.60 | 0.92 |
2,3,6,7 | 0.55 | 0.45 | 0.80 | |
4,8 | 0.30 | 0.25 | 0.70 | |
1,5 | 50 | 0.45 | 0.38 | 0.52 |
2,6 | 0.21 | 0.17 | 0.29 | |
3,7 | 0.42 | 0.37 | 0.30 | |
4,8 | 0.17 | 0.14 | 0.12 |
Reference length is 300m. Conversion factor for different lengths L (at least 200m): L/300
Type Codes
AJ- | -Outdoor cable with protection against inductive influences |
2Y | - Solid PE |
Y | - PVC |
H | - LSZH |
(St) | - Static shield of plastic-backed aluminum Tape for indoor cables |
D | - Shield of copper wire whipping. |
S | - Railway signaling cable |
Lg | - Stranded in layers |
(…Cu) | - Total cross section of copper shield in mm sq |
(fK) | - Longitdinally applied copper tape, supplement to (St) |
2B… | - two layers of steel tape, thickness of steel tape in mm |
Mechanical and Thermal Properties
Temperature range during operation (fixed state): -30°C – +70°C
Temperature range during installation (mobile state): -20°C – +50°C
Minimum bending radius: 15 x Overall Diameter
Colour Code
Coloured rings on the insulation
The tracer quad in each layer has a red helix
Dimensions And Weight
VDE CODE:
Copper tape screen & steel tape thickness of 0.5/0.8mm
AJ-2Y(St)YbY…x4x0.9/1.4 S Lg (fK) (2B 0.5) AJ-2Y(St)YbY…x4x0.9/1.4 S Lg (fK) (2B 0.8)
Copper wire screen (wire diameter of 1.2mm) & steel tape thickness of 0.8mm
AJ-2YDYbY…x4x0.9/1.4 S Lg (…Cu/2B 0.5) AJ-2YDYbY…x4x0.9/1.4 S Lg (…Cu/2B 0.8)
Cable Code | Number of Quads | Nominal Bedding/ Sheath Thickness mm | Nominal Overall Diameter mm | Nominal Weight kg/km |
Type 1: 0.9mm Conductor, 1.8mm Insulated Wire, Copper Tape Screened, RF 0.6 Steel tape thickness 0.5mm | ||||
UE-TP816AJ-2Y(St)YbY-S Lg (fK)(2B0.5)-3Q09 | 3 | 1.7/1.8 | 22.0 | 810 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK)(2B0.5)-5Q09 | 5 | 1.7/1.8 | 25.5 | 1035 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK)(2B0.5)-7Q09 | 7 | 1.7/1.8 | 26.5 | 1150 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK)(2B0.5)-10Q09 | 10 | 1.8/2.0 | 32.5 | 1550 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK)(2B0.5)-14Q09 | 14 | 1.8/2.0 | 35.5 | 1870 |
Type 2: 0.9mm Conductor, 1.8mm Insulated Wire, Copper Wire Screened, RF 0.45 Steel tape thickness 0.5mm | ||||
UE-TP816AJ-2YDYbY-S Lg (23/2B0.5)-7Q09 | 7 | 1.7/1.8 | 28.5 | 1410 |
UE-TP816AJ-2YDYbY-S Lg (25/2B0.5)-10Q09 | 10 | 1.8/2.0 | 33.0 | 1745 |
UE-TP816AJ-2YDYbY-S Lg (25/2B0.5)-14Q09 | 14 | 1.8/2.0 | 36.6 | 2060 |
Type 3: 0.9mm Conductor, 1.8mm Insulated Wire, Copper Tape Screened, RF 0.45 Steel tape thickness 0.8mm | ||||
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.8)-20Q09 | 20 | 1.8/2.0 | 40.0 | 2610 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.8)-30Q09 | 30 | 2.0/2.2 | 46.5 | 3425 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.8)-40Q09 | 40 | 2.0/2.2 | 50.5 | 4015 |
UE-Type 4: 0.9mm Conductor, 1.8mm Insulated Wire, Copper Wire Screened, RF 0.25 Steel tape thickness 0.8mm | ||||
UE-TP816AJ-2YDYbY-S Lg (29/2B0.8)-20Q09 | 20 | 1.8/2.0 | 40.5 | 2840 |
UE-TP816AJ-2YDYbY-S Lg (33/2B0.8)-30Q09 | 30 | 2.0/2.2 | 47.5 | 3655 |
UE-TP816AJ-2YDYbY-S Lg (33/2B0.8)-40Q09 | 40 | 2.0/2.2 | 51.5 | 4230 |
Type 5: 1.4mm Conductor, 2.7mm Insulated Wire, Copper Tape Screened, RF 0.6 Steel tape thickness 0.5mm | ||||
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.5)-3Q14 | 3 | 1.7/1.8 | 26.5 | 1140 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.5)-5Q14 | 5 | 1.7/1.8 | 29.5 | 1430 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.5)-7Q14 | 7 | 1.8/2.0 | 33.5 | 1790 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.5)-10Q14 | 10 | 1.8/2.0 | 39.0 | 2330 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.5)-14Q14 | 14 | 1.8/2.0 | 42.5 | 2805 |
Type 6: 1.4mm Conductor, 2.7mm Insulated Wire, Copper Wire Screened, RF 0.45 Steel tape thickness 0.5mm | ||||
UE-TP816AJ-2YDYbY-S Lg (25/2B0.5)-25Q14 | 25 | 1.8/2.0 | 35.0 | 2050 |
Type 7: 1.4mm Conductor, 2.7mm Insulated Wire, Copper Tape Screened, RF 0.45 Steel tape thickness 0.8mm | ||||
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.8)-20Q14 | 20 | 2.0/2.2 | 49.0 | 4085 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.8)-30Q14 | 30 | 2.4/2.6 | 58.5 | 5585 |
UE-TP816AJ-2Y(St)YbY-S Lg (fK) (2B0.8)-40Q14 | 40 | 2.4/2.6 | 64.0 | 6720 |
Type 8: 1.4mm Conductor, 2.7mm Insulated Wire, Copper Wire Screened, RF 0.25 Steel tape thickness 0.8mm | ||||
UE-TP816AJ-2YDYbY-S Lg (29/2B0.5)-10Q14 | 10 | 1.8/2.0 | 41.0 | 2950 |
UE-TP816AJ-2YDYbY-S Lg (33/2B0.5)-14Q14 | 14 | 2.0/2.2 | 46.0 | 3615 |
UE-TP816AJ-2YDYbY-S Lg (33/2B0.5)-20Q14 | 20 | 2.0/2.2 | 50.0 | 4310 |
UE-TP816AJ-2YDYbY-S Lg (38/2B0.5)-30Q14 | 30 | 2.4/2.6 | 59.5 | 5850 |
UE-TP816AJ-2YDYbY-S Lg (43/2B0.5)-40Q14 | 40 | 2.4/2.6 | 65.0 | 7005 |