Mold material and hardness
Views: 0 Author: Site Editor Publish Time: 2022-10-24 Origin: Site
Mold material and hardness
1. Mould mould frame should be chosen to meet the standard mould frame.
2. mold forming parts and pouring system (core, movable and fixed mold insert, movable insert, manifold cone, push rod, gate sleeve) materials with performance higher than 40Cr or above are used.
3. when molding the mold easy corrosion of plastic, molding parts should be made of corrosion-resistant materials, or its molding surface should take anti-corrosion measures.
4. mold molding parts hardness should not be less than 50HRC, or surface hardening treatment hardness should be higher than 600HV.
