Cooling and heating system
Views: 0 Author: Site Editor Publish Time: 2022-10-24 Origin: Site
Cooling and heating system
1. The cooling or heating system should be sufficiently smooth.
2. The seal should be reliable and the system should not have leakage under 0.5MPa pressure and easy to be serviced.
3. the size and shape of the sealing groove opened on the mold frame should meet the requirements of the relevant standards.
4. The seal should be greased when it is placed, and it should be higher than the surface of the mold frame after it is placed.
5. The water and oil runner spacer should be made of materials that are not easy to be corroded.
6. The front and rear moulds should adopt centralized water supply and method.
